More About The Omnipure E-Series and ELF-Series 3.5"x15", 5m, Polypropylene Depth Filtration Sediment Block, 6mos, 2.50gpm, ELF-Series ELF-XL-5M-SEDThe E-Series and ELF-Series
are both a replacement filter body engineered with a universal cap, designed to affix to existingpermanent heads, including Everpure® Standard Heads for Example. (note; Everpure QL1 Heads are Smaller Diameter, Omnipure suffix is "-SB" for Small Bayonet. ) This series offers similar performance to existing replacement filter bodies on themarket, but is offered at a much lower price.
The new E-Series and ELF-Series
are designed for our customers that are already using existing Everpure permanent heads but would likean alternative to the replacement bodies currently offered. The E-Series and ELF-Series
also fit OmnipureELF-Heads ELF-HEAD-DK7 AND ELF-HEAD-DK7-P6.
The main benefit of the E-Series and ELF-Series
is price to performance value. E-Series Water Filters
, with equal or superior filtrationcapability, are offered at a considerably lower price than comparable replacement bodies on the market. Omnipure
utilizes several media or media combinations to address standard water problems including Granular Activated Carbon (GAC), Polypropylene Depth Filtration, and Polyphospate. Omnipure also offers one or ten micron Carbon Blocks, Carbon Blocks with Lead AbsorbentMaterial and Carbon Blocks with Scale Inhibitors to address specific water conditions. E-Series
replacement bodies are offered in 6", 8", 10", 12"and 14" lengths. Bodies are tested to withstand pressure of 125 psi andtemperature of 100º F. Media service life is designed to handle up to 3, 000 gallons in some models and filtration micron ratings are as low as1 micron in other models. More About The Omnipure ELF-Series;The ELF-Series
of filters from Omnipure
was designed specifically for the higher volume requirements for the food service industry. In contrast to what the name implies, the new ELF’s (Extra-Large Format) capacity of up to 20, 000 gallons and flow rates of up to 2.0 gal/minutes, make it ideal for use in restaurants, cafes, coffee shops and vending machines. The ELF-Series
is engineered in a two-piece configuration with a permanent head and a bayonet style replaceable polypropylene body. Thisconfiguration helps to reduce cost as simple body replacement is cheaper than replacing the entire filter apparatus. Replacement is fast andeasy. The body is quickly detached from the head with the twist of a wrist, no tool required. Omnipure
has developed an entire series of carbon blocks to work in the extra large ELF
filter body. The Omnipure Blocks™
available in the ELF-Series
include standard 10 and 1 micron Carbon Blocks, Lead-Specific Carbon Blocks and Polyphosphate / Carbon Blocksfor equipment protection from contaminants associated with hard water. All Omnipure
filter bodies are made with virgin, high-impactpolypropylene which is especially ideal for use in applications where sanitary conditions are required. All materials of construction areNSF and/or FDA approved. The ELF-Series from Omnipure.
Cost-effective, point-of-use water filtration for high volume applications.