Shurflo 94-260-03, 4:1 Brix Pump 3/8" Barb Fittings and Sanitizing Valve Pentair

The Shurflo 94-260-05 Brix Pump is a unique water driven proportioning device that pumps water and syrup concentrates to deliver consistent tasting beverages, ideal for juice and flavored syrups applications. It eliminates the brix adjustments with a set portion delivery, assuring a consistent, repeatable ratio on every drink. The particular ratio is determined by the pump design and is maintained precisely. The pumps are maintained independent of system flow or pressure changes, with no need to readjust the brix at the dispensing valve. The pump operates on the source pressure of one of the proportioned liquids, typically the incoming water, eliminating the need for CO2 or electric power. For example, the 94-260-01 offers a 3:1 ratio meaning that for every 3 parts of water, the pump dispenses 1 part of syrup. This ensures that the beverage always has the same flavor and sweetness, regardless of fluctuations in water pressure or flow. The pump operates whenever there is a difference in pressure between the inlet and outlet (water) sides of the pump. The Shurflo Brix Pump is equipped with a vacuum shutoff. This feature is designed to automatically stop the pump when the Bag-in-Box (BIB) container is completely evacuated by closing off the inlet water to the pump. When a new BIB container is installed, the pump will automatically resume operation without priming the system. When your customer demands a quality drink, you are assured that the Shurflo Brix Pump will deliver accurate, repeatable brix without the need for an expensive metering device. See the Brix Pump Installation Guide by clicking the link below. A 183 Series WPRV Water Pressure Regulating Valve and 84-010 Backflow preventer is required for proper operation.
Brix Pump Installation Schematic

• Incorporates a three-way sanitizing valve & mounting bracket included
• Sold out feature
• Equipped with built-in automatic vacuum and shutoff valve
• Water pressure up to 50 PSI
• Metal mounting bracket
• Fittings: syrup in/syrup out; 3/8" [10 mm]Barb elbow, white or black celcon