Flojet Q40HF-118S-2P VersiJet 4 Chamber Demand Pump 115VAC 4gpm S/E 60psi 40°F to 140°F, (x2) 3/4" straight hosebarb Corded

Q40HF-118S-2P Data Sheet
Flojet VersiJet Series Pumps are equipped to tackle a variety of industrial applications such as fluid handling for car wash and industrial environments. Built with a heavy-duty coated motor and a durable Santoprene diaphragm, these self-priming pumps deliver efficient performance for agricultural, construction, and disinfection and sanitization that require spraying, fluid transfer, cooling, circulation, filtration, dispensing applications and pressure boosting, while requiring minimal maintenance.
The VersiJet Q40HF-118S-2P generates a maximum flow rate of 4 GPM and a maximum pressure of 60 PSI.

Benefits:

• Self-Priming: Draws liquid efficiently with up to 8 feet (2.4 meters) of dry prime, allowing the pump to pull fluid from the source without manual priming.
• Runs Dry Without Damage: Designed to operate safely even when the fluid supply is interrupted, meaning the pump will not suffer internal damage if left running without liquid, giving operators added protection from accidental dry runs and helping prevent costly downtime.
• Integrated Excessive Pressure Protection: A pressure switch shuts off the pump automatically when system pressure reaches 60 PSI. This feature helps prevent over-pressurization, protecting downstream equipment and extending pump life by minimizing unnecessary wear.
• Quiet, Efficient Operation: Reduces noise and energy usage through a four-chamber diaphragm design and noise-dampening base plate.
• Reliable Performance: Designed for industrial fluid transfer and spraying in harsh environments.
• Long-Lasting Chemical-Resistant Construction: Features glass-filled polypropylene housing and EPDM seals for enhanced chemical resistance and durability.
• Easy Installation: Quick-connect fittings speed up maintenance and replacement.

Applications:

• Agricultural
• Construction
• Disinfection and Sanitization
• Liquid Transfer
• Spraying
• Cooling
• Circulation
• Filtration
• Dispensing
• Pressure Boosting

Specifications:

• Model: Q40HF-118S-2P
• Open Flow Rate: 4 GPM (15 LPM)
• Pressure Switch Cut Off: 60 PSI (4.1 BAR)
• Max Operating Pressure: 60 PSI (4.1 BAR)
• Max Inlet Pressure: 30 PSI (2.2 BAR)
• Self-Priming Capability: Up to 8 ft (2.4 m)
• Run-Dry Capable: Yes
• Nominal Voltage: 115 VAC
• Voltage Range: 104–126 VAC
• Max Current Draw: 1.3 Amps @ 60 PSI
• Leads: 6 ft. (1.8 mm) Power Cord
• Wire Connection: Plug
• Duty Cycle: Intermittent
• Port Fittings: 2 x 3/4" (19 mm) straight hose barb
• Fluid Temperature Range: 32ºF – 140ºF (0ºC – 60ºC)
• Internal Bypass: Yes
• Self-Priming Capability: Up to 8ft (2.4m) Dry Prime
• Run-Dry Capable: Yes

Materials:

Wetted Path:

• Upper Housing: Glass-Filled Polypropylene
• Lower Housing: Cast Aluminum
• Diaphragm: Santoprene
• Check Valve Retainer: Polypropylene
• Check Valves: EPDM
• Switch Diaphragm: EPDM
• Bypass Diaphragm: EPDM

Pump Head:

• Seals: EPDM
• Fasteners: Stainless Steel

Dimensions: 12 x 12 x 11.5 in (305 x 305 x 292 mm)

Weight: 5.2 lbs (2.4 kg)

Mounting: Horizontal (preferred) or vertical with pump head down

Certifications: UR listed; IPX6 rated

Replaces Flojet Models:

• 04300501A
• 04300515A
• 04300545A