Omnipure Q5629 2.5"x12", 1m, Catalytic Carbon Chloramine Aquabond, Q-Series Water Filter, Pre RO

The Omnipure Q5629 is a 12-inch catalytic carbon block replacement filter from the Q-Series line, specifically engineered for the high-capacity reduction of chloramines in addition to chlorine, bad tastes, and odors. It is a twist-in cartridge designed for use with permanent Omnipure Q-Series heads, which often feature an automatic shut-off valve to make replacements tool-free and mess-free.

• Filter Media: Catalytic Carbon Block.
• Catalytic Carbon should be used in Municipalities where Chloramines are used
• Micron Rating: 1 Micron
• Dimensions: 2.5" Diameter x 12" Length
• Service Life: 6–12 months or approximately 1,000 gallons for chloramine reduction (up to 2,500 gallons for chlorine)
• Flow Rate: 0.5 GPM (1.9 LPM)
• Operating Pressure: 20–125 PSIG

This filter is commonly used as a pre-filter or post-filter in various systems, including:

Reverse Osmosis (RO) Systems.

Under-sink drinking water systems.

Ice machines and refrigerators.

Beverage equipment and water coolers.

Installation Tip: Before using a new cartridge, flush it with at least 5 gallons of water to remove any loose carbon fines and check for leaks.