Primary Regulator suitable for Beer, Wine, Coffee, 2P2P, 1/4" Flare Inlet w/6' Hose (CGA320), 1/4" Flare Outlets w/Check, 100lb, 160lb, and 2000lb Gauges, Red and Gold Caps
The 8000 Series is similar to the 5740 Series of Primary Regulators (for direct cylinder mount) and have a non-adjustable safety built into the body of the regulator where it cannot be removed or easily circumvented. In the event of a failure of the regulator seat, this safety will respond instantaneously protecting anything downstream from potentially dangerous high pressure. The maximum down stream pressure the system will see will not exceed 143 psig in accordance with NSDA guidelines.

8000 Series For Commercial, High Volume

Polycarbonate bonnet will not chip, break or fade

High CO₂ volumetric flow provides continuity in product dispensing

Primary regulators connect directly to gas source

Recommended  operating pressure be limited to 2/3 of the gauge range for maximum accuracy

UL approved per UL252 class IV rating for CO₂

Both Primary and Secondary regulators can accept CO₂ tank pressure

10 Micron filter built in to keep contaminants out of regulator

Used primarily for Soda and Beer but can be used for other applications.

One repair kit for primary and secondary

Log In For Your Wholesale / Volume Price or Contact IPS For Volume Quotes & Other Options Click Here! [email protected]

7-10 Day ETA for Out of Stock/Non-Stock Items in this Category