WATER BLOCK SAFETY DEVICE Eltek

The Eltek Water Block Safety Device is Ideal for POU coolers, coffee makers, vending and small ice machines, the Everpure Water Block is a reset safety device that measures the number of gallons of water that have passed through it. If the volume exceeds the preset value, the device automatically stops the flow. If the water volume does not exceed the set value, the device resets the measured volume and is ready to start a new measurement cycle.

Dimensions; 3/4" Female x Male GHT (North America GHT)
Pressure Requirements; 10 - 125 PSI (0.7 - 8.6 bar)
Ambient Temperature; 35° - 140°F (2 - 60°C)
Fluid Temperature; 35° - 158°F (2 - 70°C)
Flow Rate; 0.53 - 7.9 GPM (2 - 30 Lpm)
Resistance to Bursting 725.19 PSI at 77 F (>50 bar at 25?C)
Related Lifespan 79,000 gal (300,000 L)
Click the part # below for specific image and a closer look
Scroll for more Information, Spec Sheet and Settings Guide
Please Contact us for high volume quotes Contact Us!

Products (Total Items: 4)

Part #

Image

Description

Stock

Price

Quantity

EV313861

WaterBlock Adapter 3/4" MGHT Hex Nipple Eltek Everpure EV3138-61

Pre-Order / Non-Stock

$2.95

EV9503-05

WaterBlock Device 3/4" GHT Female x Male Eltek Everpure EV9503-05

SALE PRICE LIMITED TO STOCK ON HAND

Sale

~~$55.39~~ $42.49

EV9503-25

WaterBlock Reset Device 3/4" GHT Female x Male Eltek Everpure EV9503-25

SALE PRICE LIMITED TO STOCK ON HAND

Sale

~~$52.95~~ $23.42

FC2W

2-inch Single Mount Base Clip for Inline Water Filters, RO Membranes, Water Block Device White FC2W

New Lower Price

$0.76

Everpure Eltek Water Block Safety Device EV9503-05

Eltek Water Block Overflow safety device controls the maximum consumption of water between 1.3 and 13.2 gallons (4.9 and 49.97 L). Device measures the number of gallons of water that have passed through it; if this quantity exceeds the set value, the Eltek Water Block stops the flow and maintains this safety condition until user intervention. If the water volume does not exceed the set value, the Eltek Water Block mechanically and automatically resets the measured volume and is ready to restart a new measurement cycle. No external energy source required, water simply flows through device. Resistant to chlorine and chloramines damage.

APPLICATIONS

Coffee Brewers
Espresso Machines
Iced Tea Machines
Small Ice Machines
Boiler Steam
Point-of-Use (POU) Coolers
Under counter Chillers
Under counter Instant Hot Water Heaters
Vending Machines
Note: not recommended for use prior to reverse osmosis systems or with Flaker / Nugget ice machines.

INSTALLATION TIPS

Vertical assembly preferred
Not recommended for reverse osmosis (RO) installation as an RO system by nature can produce permeate water for long periods of time which will unnecessarily trip the Water Block.
Use of the optional Water Block External Reset Device (EV9503-20) is recommended. Internal reset can be used instead, however, this does require disconnecting the water line.
Use of an optional EV3138-61 GHT Adapter (not shown) is recommended for installation with garden hose type (GHT)connectors.
Optional clip (part number EV3118-40) can be used for mounting during installation

OPERATION TIPS