Valumax Autotrol Backwashing Filter Systems
•Filter media selection is based on application.
• Media data sheets are available through customer service if required.
• Backwashing filters shown represent common sizes and media choices.
• Other sizes and media selections are available.• Install parts (bypass valve, tube adapter kits, drain fittings) are not included with units. These must be ordered separately and are listed at the end of this section.
• Backwash flow rates should be considered for drain pipe sizing and should typically be 3/4” OD or larger.
• Units up to 2 cubic feet (12” x 52” media tank) are shipped with media loaded. Larger systems have media packaged separately which must be loaded on site0.
Carbon Filters
• Chlorine reduction
• Taste and odor reduction
• Reduction of chemical by-products of chlorination, pesticides, herbicides and other organic chemicals
• 3 cycle operation - Backwash, Fast rinse, Service
• 742 professional electronic time clock control
• Carbon works by chemical adsorption, and will need periodic replacement to maintain effectiveness
Valumax 263/742 Time Clock Control (Logix) - Backwashing Filters

Carbon Filters
Description	Part #
1.0CUFT;CARBON;263-742;;RT 9X48	CFM-1.0-263-CARBON
1.5CUFT;CARBON;263-742 ;RT 10X54	CFM-1.5-263-CARBON
2.0CUFT;CARBON;263-742 ;RT 12X52	CFM-2.0-263-CARBON
3.0CUFT;CARBON;263-742 ;RT 14X65	CFM-3.0-263-CARBON
4.0CUFT;CARBON;263-742 ;RT 16X65	CFM-4.0-263-CARBON

Catalytic Carbon Filters• Chloramine reduction
• Iron and Hydrogen Sulfide removal (typically requires air injection)
• 3 cycle operation - Backwash, Fast rinse, Service
• 742 professional electronic time clock control

Catalytic Carbon Filters - Chloramine Reduction
Description	Part #
1.0CUFT;CATALYTIC CARB;263-742;;RT 9X48	CFM-1.0-263-MC1240
1.5CUFT;CATALYTIC CARB;263-742 ;RT 10X54	CFM-1.5-263-MC1240
2.0CUFT;CATALYTIC CARB;263-742 ;RT 12X52	CFM-2.0-263-MC1240
3.0CUFT;CATALYTIC CARB;263-742 ;RT 14X65	CFM-3.0-263-MC1240
4.0CUFT;CATALYTIC CARB;263-742 ;RT 16X65	CFM-4.0-263-MC1240