HydroFit WNV-3 Feed Water Adapter 1/2" FPT x 1/2" MPT x 1/4" Tube Hydronix

The Hydrofit WNV-3 is a plastic feed water adapter used to connect water filtration systems, such as reverse osmosis (RO), to a standard cold water supply. It features a 1/2" female NPT x 1/2" male NPT pass-through and a 1/4" quick-connect outlet for the filter tubing.
HYDROFIT™ - Quick Connect Fittings are ideal for use on a broad range of applications; Reverse Osmosis Systems, Water Coolers, Coffee Machines, RV’s, Misting Systems, Marine, Point-of-Use Filtration, Beverage Dispensing, Ice Makers, Car Wash Systems and many others. HYDROFIT™ - Quick Connect Fittings are designed to be used with potable water but are also compatible with a wide range of chemicals (see chart) to suit your multiple application needs.

• Part Number: WNV-3 (also referenced as HDF-WNV3).
• Body FDA POM (Polyacetal, Polyoxy Methylene)
• O-Ring Nitrile (NBR)
• Collet Polyoxy Methylene & SS Teeth
• Zero Stock Items in this category 7-14 Day ETA
• Buying In Bulk? Look for Qty Price Breaks

Installation Overview;

1. Preparation: Turn off the cold water supply valve and open the faucet to relieve pressure.
2. Mounting: Unscrew the faucet connector pipe from the supply valve. Install the WNV-3 adapter directly onto the valve, ensuring the internal O-ring is seated to prevent leaks.
3. Connection: Reattach the faucet connector pipe to the male end of the adapter.
4. Insert your 1/4" RO tubing into the quick-connect port until it reaches the internal stop (approx. 0.5 inches deep).
5. Testing: Turn on the water supply and check all joints for leaks.
6. Fittings and tubing installations should be pressure tested and each connection inspected by pushing and pulling on the connection points prior to handing over to the final user.